Agriculture

Navigation menu

Body Solid G9S Assembly Instructions Manual
Rice was domesticated in China between 11, and 6, BC with earliest known cultivation from 5, BC, [10] followed by mung , soy and azuki beans. The Navy even marked my medical records to NOT be given the flu shot. You are really talking about excessive oxidative damage. James, I want to thank you for convincing me that as a blogger I do not have the expertise to write on most health subjects. Pig Anatomy in 3D - Scale Model [16cm]. UN Food and Agriculture Organization.

Other Publications

The Acid-Alkaline Myth: Part 1

Finally, the role of management and the need for least cost production is discussed. Nutritional Approaches to Arresting the decline in Fertility of Pigs and Poultry is aimed at livestock farm managers, feed industry consultants, vets, nutritionists and poultry producers as well as students and researchers studying animal and applied biological sciences.

Organic or inorganic selenium for hyperovulatory first-parity sows? Targets for gilt preparation Gestation feeding Lactation feeding Sow Longevity Mineral needs for reproduction Current thinking on organic minerals References Role of the boar in maximising reproduction: Feeding the genes for fertility Using genomic information to understand fertility Oligonucleotide microarrays as a tool for examining gene regulation in swine Examining fertility issues using gene expression Nutrigenomics Effects of selenium on gene expression Vision of the future New or Used Copy Ordering: Evaluating Water Quality for Livestock: Elevating Performance and Health in Pigs and Poultry A series of reviews from world-leading authorities on pig and poultry nutrition, health and production.

Deals with current issues of nutrition and health, including interactions and potential conflicts between them plus ways to combat Salmonella and mycotoxins. The importance of digestive function and the influence of nutrition on liveability and disease are covered in-depth.

Fluctuation in feed prices has a greater impact on production costs and profitability than any other factor. Cost of production COP may be decreased by reducing input prices eg switching to a cheaper ration or purchasing in larger quantities, or achieved through simple practical actions to minimise feed wastage and improve efficiency of feedstuffs utilisation.

There is more pork consumed in the world than any other meat and intense competition to attract and retain customers. Consumers continue to demand safe, high quality pigmeat and poultry products at competitive prices compared to other high protein food alternatives.

To ensure sustainability of both the pig and poultry industries, producers must endeavour to seek new technologies to improve production efficiency whilst lowering the cost of production and producing a quality product. This edited by J. Spring collection of articles is from a series of seminars by the world's leading authorities in the field of swine and poultry nutrition and production. The fundamental theme is to re-examine the current trends in productivity within the pig and poultry industries, and to identify nutritional and managerial means to improve competitiveness as well as the quality of the end product.

The importance of animal health together with novel strategies for disease control and ways to minimise the environmental impact of pig and poultry production are covered. The book is aimed at pig unit managers, consultants, nutritionists and animal producers as well as students and researchers studying livestock and applied biological sciences.

Hot topics important to the industry and meat scientists are electrical stimulation and new instrumental methods for evaluation of meat quality characteristics. Reflects the global nature of meat research and gives insight into current issues.

The nutrition of the young pig is one of the most active practical scientific fields of porcine nutrition throughout the world. The profitability of any pig farm production programme is demonstrated by the fact that maximal early growth in pigs, which depends on correct nutrition, is extremely efficient, yet rarely achieved in most commercial farm situations.

It includes coverage of nutritional physiology, nutrient requirements, ingredients and diets, feed programmes and management systems. Concerns and problems related to food safety, animal welfare and rural environment are discussed within an wholistic, yet science-based, approach. This unique approach adds value compared to other textbooks which cover these topics from a specialist point of view. The different issues are developed by well-known experts in their field of work.

They are dealing with the latest developments in livestock production in relation to social concerns - regulations, risk communication, reduction of environmental impact, sustainability and economic and social impacts of alternative strategies - and production systems including transport and slaughter, feeding strategies, waste management and future monitoring technology.

General Nutrition Principles for Swine An extensive manual of nutritional principles for proper feeding of pigs: The incidence, course and outcome of production diseases are changing continuously. Therefore, new information on prevention, diagnosis and treatment of production diseases is needed.

These problems are complicated by the discussion of animal welfare, the rapid changes in agricultural production and the economics of production. The following key topics are handled: Concepts and Consequences 32 Authors include Prof. Mersmann Reference manual for animal scientists, veterinarians and biomedical researchers reflects the fact that since the s the knowledge base about the physiology and biology of the pig has grown phenomenally.

The book offers an integrated description of the full scope of current knowledge. The editors have included chapters on the expandin fields of immunology, endocrinology and genetics.

Growth, digestion, nutrition, respiration, excretion and reproduction are extensively treated. The final chapter covers the emerging applications of transgenics, metabolite replacement therapy and xenotranslantation the use of animal tissues in humans. Ordering details in new window: The central role of nutrition in the breeding of swine is well known. In the last two decades there have been huge advances in the knowledge of sow and boar nutrition which has allowed the development of effective feeding strategies.

This internationally acclaimed book aims to provide information to allow the development of appropriate feeding strategies. A program to perform Deming regression is available online as a supplement from this journal 8.

The correlation coefficient has limited utility and should not be used as a basis for determining the method performance.

The International Union of Pure and Applied Chemistry defines analytical sensitivity as the ability of an analytical procedure to produce a change in signal for a defined change of the quantity.

This is often visualized as the slope of the calibration curve and this term should not be used to represent any other analytical characteristic. Other scientifically sound, valid approaches can also be used, e. Results obtained for the performance characteristics should be compared objectively with well- documented quality specifications, e. Reference interval normal range: Depending on the conclusions of the accuracy studies, modification of an accepted reference interval may be indicated.

Description of the reference interval study should include details about sampling; selection of subjects, including their number, age, and sex distribution; the statistical method for summarizing the results 13 ; and other factors that would influence the values obtained. Mass spectrometric assays must be evaluated for matrix effects ion suppression or enhancement 14 , Chromatograms from gas-liquid and liquid chromatography should usually be presented so that readers can see the efficiency of the separation and observe the resolution from interferents in the matrix.

Similar images are often needed for electrophoretic separations. Enzyme activities may be expressed in international units U or katals. Temperature and other key assay features must be described in the text or by reference to a published method. When first mentioned in the text, enzymes whether measured by activity or mass assays must be numbered EC no.

Describe statistical methods with enough detail to enable a knowledgeable reader with access to the original data to verify the reported results. When possible, quantify findings and present them with appropriate indicators of measurement error or uncertainty. Avoid sole reliance on statistical hypothesis testing, such as the use of P values, which fails to convey important quantitative information.

When appropriate, confidence intervals should be presented; see, e. All investigators should ensure that the planning, conduct, and reporting of human research are in accordance with the Helsinki Declaration as revised in https: All authors should seek approval to conduct research from an independent local, regional, or national review body e.

If doubt exists whether the research was conducted in accordance with the Helsinki Declaration, the authors must explain the rationale for their approach and demonstrate that the local, regional, or national review body explicitly approved the doubtful aspects of the study.

Approval by a responsible review body does not preclude editors from forming their own judgment whether the conduct of the research was appropriate. Patients have a right to privacy that should not be violated without informed consent. Authors should obtain and archive written patient consent forms in accordance with local regulations or laws and will be required to attest in writing upon submission that they have received and archived written patient consent.

Nonessential identifying details should be omitted. Informed consent should be obtained if there is any doubt that anonymity can be maintained. For example, masking the eye region in photographs of patients is inadequate protection of anonymity. Please note if informed consent has been received in the Materials and Methods section of the submitted manuscript. When reporting experiments on animals, authors should indicate whether institutional and national standards for the care and use of laboratory animals were followed.

The policy requests that the release date to the public be within 12 months after the official date of final publication. If an author chooses to submit an accepted manuscript to PMC, he or she will be asked to indicate when that manuscript should be made available to the public.

All copyright restrictions apply. This version of the manuscript may contain factual errors that were detected during the post-acceptance editing phase. Data, text, conclusions, tables, and figures may all differ from the published version available at www. The final published version is the JALM article. JALM assumes no responsibility for earlier versions. This may not be duplicated or reproduced, other than for personal use or within the rule of 'Fair Use of Copyrighted Materials' section , Title 17, U.

Code without permission of the copyright owner, AACC. The AACC disclaims any responsibility or liability for errors or omissions in this version of the manuscript or in any version derived from it by the National Institutes of Health or other parties.

The final publisher-authenticated version of the article is available at http: Authors may contact JALM via e-mail at jalm aacc. More information from NIH can be found at http: Requirements for the description of sequence variants can be found at http: Tools for Diagnostic Accuracy.

Do not send the checklist via e-mail or upload it as supplemental material. The STARD statement 3 provides guidance helping authors to modify their manuscript as needed to provide the requested information. The CONSORT statement 1 , although designed for randomized controlled trials and used for therapeutic rather than diagnostic interventions, is recommended for guidance.

For questions, contact JALM via e-mail at jalm aacc. MIAME describes the minimum information about a microarray experiment that is needed to enable interpretation of the results of the experiment unambiguously and potentially to reproduce the experiment.

MIAME is neither a dogma nor a legal document - it assumes a cooperative data provider and a fair reviewer. The full text of the MIQE guidelines is available online: A PDF version for all essential components of the checklist can be obtained by the link above. Authors are also encouraged, but not required, to include the additional desirable items of the MIQE guidelines 1. They are also a guide for reviewers and editors to judge the quality of qPCR data.

Incomplete information may be grounds for manuscript rejection. Use of Supplemental Data is encouraged as necessary. The most common errors in performing and reporting qPCR data include:. The guidelines require not only delineation of what was done, but presentation of evidence that validates the method used. At the option of the editor, MIQE requirements may be relaxed in reports using qPCR arrays, although all manuscripts will be judged on their relative merit, and the relative merit of a manuscript using qPCR increases as compliance with the MIQE guidelines increases.

All submissions are reviewed by the Editor-in-Chief then the Deputy Editor before being assigned to an Associate Editor. Based on editorial judgment, some submissions are rejected initially without external review. This means that authors do not know the identity of the reviewers. Associate Editors may select external reviewers using a database of experts, use reviewers recommended by the authors, or make their own reviewer selections.

Reviewers provide comments for Associate Editors and the authors, as well as a decision recommendation. Upon receiving the comments, the assigned Associate Editor will make a decision recommendation to the Editor-in-Chief and Deputy Editor who will ultimately make the final decision.

If a review is required, authors may expect to learn of the editorial decision acceptance, revision, or rejection in approximately 4 weeks, depending on the turnaround time for reviews. The editors did not select your manuscript for publication. Many factors contribute to acceptance including, but not limited to, the following:.

If an author disagrees with the editorial decision, cordial inquiry is invited through the online Manuscript Processing System. The response must be timely and include a detailed rebuttal. Revision The editors believe that your article contained information of potential importance but a number of issues were raised. If you believe that you can address the issues raised, the editors would be willing to reconsider your manuscript but cannot guarantee acceptance, particularly if you cannot address the concerns.

Acceptance The editors selected your manuscript for publication. Additional information will be provided regarding embargo policies and the production process.

Research or scientific articles are submitted directly from authors. There are no restrictions on topics that are considered for publication, as long as the subject matter is original and relates experimentally or theoretically to the field of laboratory medicine. The information must be sufficiently detailed not only to enable readers to understand and appreciate the material presented, but also to permit replication of the work by other scientists in the field.

Articles should contain a structured abstract limited to words and formatted to include separate headings of: Background, Methods, Results, and Conclusions. An Impact Statement should appear after the abstract. The main text should not exceed 3, words. Supplemental data are encouraged for Articles. Articles should list no more than 20 authors, with any additional contributors listed in the Acknowledgments.

Although exceptions are rare, you may email jalm aacc. Authors may submit short videos to complement their Articles. Videos can be used to illustrate a laboratory technique, hardware prototype, or clinical presentation that would benefit from such an addition, or to visually communicate to the reader novel features, special steps in a procedure, pitfalls, or other information that may not be easily conveyed through text or a figure.

Videos should be of high quality, no more than 5 minutes in length, and submitted as. Do not send proprietary file types such as. Case Reports are submitted directly from authors. These articles are intended to be educational, with the goal of helping to develop or improve problem-solving skills. Case Reports may report unusual although not necessarily rare biochemical manifestations of disease, atypical presentation of disease, situations where the laboratory helped in making or clarifying a diagnosis, or information that would be helpful in understanding the pathophysiology of a disease.

The case should read as a bit of a mystery or diagnostic dilemma. The case title and case description should not disclose the diagnosis. A Case Report should not include an abstract. It should, however, include a case description followed by the case discussion, limited to 1, words total. References are limited to 10, and the tables and figures are limited to 2 in total.

The author should list up to 5 takeaways for the reader at the end of the manuscript. The takeaways are not included in the manuscript count of 1, words. Supplemental data are not permitted for Case Reports. No more than 5 authors should be listed. Corrections are unique and will be considered on a case-by-case basis. Authors are encouraged to contact the Editorial Office at jalm aacc.

These are typically invited submissions. Editorials provide opinions and observations by an expert in the field about the subject matter or content of a scientific paper published in JALM. In addition to further educating readers on a selected topic, Editorials are designed to stimulate readers to formulate their own opinions about a paper and its value to the field.

In some cases, Editorials may also be independent opinions and observations about a controversial topic or changes taking place in the field. Editorials are limited to 1, words. They should not include an abstract. References are limited to 15, and tables and figures are not permitted. Supplemental data are not permitted for Editorials. The Focused Report category is intended for concise method evaluation contributions and succinct clinical manuscripts.

All Focused Reports will undergo peer review. Submissions in this category should contain four sections: Abstract structured, no more than words , Introduction, Methods, Results, and Discussion.

They should be no more than 1, words in length with a maximum of 20 references and a total of no more than two tables and figures. Figures and tables should not be multipart i. Supplemental data are permitted for Focused Reports. In some instances, editors may request that a submission of another article type to JALM be decreased to meet the requirements of a Focused Report.

The Laboratory Reflections section contains additional features in areas of interest to readers. Submissions will be considered in the following categories:. Advice on practical solutions to technical challenges and unmet needs that are encountered in the laboratory practice.

A place to share information on topics such as advice, experience, and resources for mentoring, training, teaching, having visitors in your laboratory, and contact with others in the field.

This section will include contributions from forward-thinking individuals in the field who wish to share their vision, intuitions, experience, and perceptions with JALM readers and the laboratory medicine field. Submissions to Laboratory Reflections are limited to words and should not include an abstract.

The references are limited to 5, and only 1 table or figure is permitted. Supplemental data are not permitted. This section celebrates the important moments and individuals note-worthy to the field of clinical chemistry.

Letters are submitted directly from authors and can be used to report an observation or to discuss a previously published original Article. Letters in response to papers other than Articles or Case Reports will not be considered for publication. Letters report observations on interferences, suggestions to improve test performance, or other observations that are of importance to the wider audience.

A Reply to a Letter may also be solicited by the editors. The one figure or table provided should be concise and should not be multipart i. A Letter to the Editor is limited to words. It should not include an abstract. Supplemental data are not permitted for Letters to the Editor. A Reply is limited to words. Supplemental data are not permitted for Replies. Letters to the Editor and Replies should list no more than 8 authors, with any additional contributors listed in the Acknowledgments.

In some instances, editors may request that a submission of another article type to JALM be decreased to meet the requirements of a Letter to the Editor. Mini-Reviews may be submitted directly by authors or invited by the journal. Mini-Reviews are intended to provide a general overview of a topic. Basic information is provided, along with selected references that can aid the reader in obtaining additional information about the subject.

The use of illustrative figures or tables is encouraged. A Mini-Review article should consist of a structured abstract limited to words with headings of Background, Content, and Summary. The text should not exceed 3, words. Mini-Reviews should list no more than 5 authors, with any additional contributors listed in the Acknowledgments.

They present the belief or personal view of the author s on a specific topic. Unlike Editorials and Letters to the Editor, Opinion articles do not comment on, or refer to, specific papers published in this or any other journal.

An Opinion should not include an abstract and is limited to 1, words, 15 references, 1 table or figure, and no more than 5 authors. Supplemental data are not permitted for Opinions. These articles are typically invited submissions from experts in a selected discipline and provide different viewpoints on a topic that may be controversial, lacks consensus in the scientific community, or may be of high public interest.

The manuscript is limited to 1, words, 15 references, and 1 table or figure. Reviews are intended to provide comprehensive coverage of a topic, including background clinical or analytical information, the relevance and importance of the subject matter, and potential future directions.

A Review article should consist of a structured abstract with headings of Background, Content, and Summary limited to words. The text should not exceed 5, words. Exceptions to the reference count may be made at the discretion of the editor. Supplemental data are encouraged for Review articles. Reviews should list no more than 15 authors, with any additional contributors listed in the Acknowledgments.

Special Reports may be submitted directly by authors or invited by the journal. The types of papers that would be considered include consensus reports, guideline development, position statements, or evidence-based recommendations on test utilization or quality specifications.

The editors may also decide to classify other miscellaneous submissions under this heading. A Special Report should consist of a structured or unstructured abstract limited to words. The main text should be no more than 5, words. Supplemental data are permitted for Special Reports. Special Reports should list no more than 20 authors, with any additional contributors listed in the Acknowledgments. For more information or to request open access publication, contact the Editorial Office at jalm aacc.

All papers are made open access one year after publication. Articles are grouped in the journal according to subject. Upon submission, authors are required to select the journal category that best describes their manuscript from the list indicated below:. Structured abstracts should be formatted to include separate headings of: For Mini-Review and Review articles the headings should be: Background, Content, and Summary.

Both structured and unstructured abstracts are subject to a limit of words. In addition to appearing at the beginning of the manuscript, abstracts must be uploaded to the abstract field of the Manuscript Metadata page online upon submission.

Article , Review , Mini-Review , and Focused Report submissions should include an Impact Statement in the main manuscript, immediately following the Abstract. The Impact Statement should be no more than words and should address the following:. The body of the manuscript should be written as concisely as possible and must not exceed the manuscript category word limits described herein. All pages must be double-spaced and all lines numbered.

The body of the paper should include: Introduction, Materials and Methods, Results and Discussion. Full corporate names of manufacturers of materials should be utilized omit Inc. After the first mention, use a shorter name e. Reporting of Concentration Units: Use of human subjects requires a statement in the text indicating whether the procedures followed were approved by your institution's responsible committee Institutional Review Board or Ethics Committee or were in accordance with the current revision of the Helsinki Declaration and whether subjects gave informed consent.

Accession numbers for data sets or sequence reads that have been deposited in a public database should be provided in the Materials and Methods section of the text. Where applicable, a ClinicalTrials. If you include research funding in the Acknowledgment, you must specify which author or authors received the funding or if the funding was given to the group or institution. Editorial staff will transfer this information to the disclosure section prior to publication if the paper is accepted. References should appear in a separate section directly following the body of the manuscript.

In-text citations should correspond to the numbered references in this list and should be formatted as follows: Abstract and supplement numbers should be provided, if applicable. Personal communications should also be listed parenthetically and should contain the first initial and last name of the contact as well as the month and year of the communication.

A copy of written permission from the contact to use the communication must also be provided. Published manuscripts and manuscripts that have been accepted and are pending publication should be cited in the reference list. Note that unpublished material must be published, at least online, by the time of publication of the citing article. In-press references cited in the reference list must be accompanied by a copy of the cited manuscript and a letter of acceptance, or a complete author proof from the publisher.

These resources should be uploaded as supplemental data along with the manuscript and other print materials. The submission system will extract the references from the submitted MS Word document. This linking option allows for the checking of the correct formatting and the accuracy of the citations. Correct linking of the references depends on strict adherence to Journal style as indicated.

JALM style is available in the Endnote reference formatting program. In particular, journal names may not be abbreviated correctly in the output. If you have used PubMed for journal name abbreviations, it is recommended that you take the following steps:.

Refer to the Endnote Help Center for further assistance. A case of pseudoparaproteinemia on capillary zone electrophoresis caused by geloplasma. Affinity binding assay of glycohemoglobin by two-dimensional centrifugation referenced to hemoglobin Alc. Quantification of rhesus monkey albumin with assays for human microalbumin [Abstract]. New biochemical marker for bone disease: Davey L, Naidoo L. Urinary screen for acetaminophen paracetamol in the presence of N-acetylcysteine [Letter]. Rifai N, Warnick GR.

Lipids, lipoproteins, apolipoproteins, and other cardiovascular risk factors. Tietz textbook of clinical chemistry and molecular diagnostics. Immunonephelometric measurement of vitamin D binding protein [MAppSci thesis]. University of Technology, PCR-based methods for the enrichment of minority alleles and mutations.

Lipids, risk factors and ischaemic heart disease. American Association for Clinical Chemistry. Tables are considered text. They should appear embedded as part of the submission directly following the reference section. Each table should appear on an individual page. Manuscripts will be returned to authors if the tables are uploaded as separate table files. Manuscripts will not be returned for this reason if tables have been uploaded as supplemental data or if they are to be considered figures, in the special circumstances described below.

Each table should be clearly labeled and numbered consecutively with Arabic numerals Table 1, Table 2, etc. The abbreviations used must be defined. Tables should not be divided into parts. Separate parts Table 1A, Table 1B, etc. Each column of an individual table must have a heading and be clearly defined.

Indicate explanatory footnotes with superscript lowercase italic letters in alphabetical order. Tables will be converted into a standard format for publication. Large or complex tables or tables that include graphic elements should be submitted as figures or as supplemental data for online publication only. If a table has been published previously, acknowledge the original source in the table caption.

You must obtain written permission from the copyright holder to reproduce the table and upload this permission as supplemental data. Please specify whether the table has been exactly reproduced or adapted from the original source, and provide a copy of the original table if it has been adapted. Even if the table has been modified, it may still require a permission. Any costs associated with table permissions will be borne by the author.

Contact the editorial office at jalm aacc. Figure captions and sub-captions must be listed together on an individual page directly following the tables or the references if the submission does not include tables. Each figure requires a figure caption and should be clearly labeled Figure 1, Figure 2, etc.

Multi-panel figures and figures with parts a, b, c, etc. If a figure has been published previously, acknowledge the original source in the figure caption.

You must obtain written permission from the copyright holder to reproduce the figure and upload this permission as supplemental data. Please specify whether the figure has been exactly reproduced or adapted from the original source, and provide a copy of the original figure if it has been adapted.

Even if the figure has been modified, it may still require a permission. Any costs associated with figure permissions will be borne by the author. All figures must be uploaded separately as image files in Tagged Image File Format.

Figures are limited to 4 panels or parts per figure. Each image should have a resolution of dots-per-inch dpi. The submission system is designed to retrieve the manuscript file and separate image file s and combine or merge the files into an individual Portable Document Format. PDF for reviewing purposes. It is the responsibility of the author to verify the quality of the image file s after the conversion to PDF.

It may be necessary to alter the individual image file s to ensure the content is not lost or misconstrued in the merged PDF. Submissions will be returned to authors if the figures are embedded within the manuscript file and not uploaded separately or if the figures have become illegible in the merged PDF.

Do not place unnecessary graphics, such as borders, in or around your figure. Pay particular attention to the quality of the lines, symbols, and patterns. Published figures are reduced to 1 column 85mm or 2 columns mm in width.

If, at that width, the figure symbols or lettering are not clear, you will need to increase the font size. Letters should be points when reduced, and subscripts no less than 6 points.

Initial capitals and lower case letters and a medium not bold sans serif font are required. The x-axis and y-axis should be clearly labeled, and the units of measurements given.

This includes using decimal points instead of commas, italicizing species or gene symbols, and using U. Figures or tables too large for print, manuscript material that exceeds the limitation for the specific submission type, or appendices should be submitted for online publication only.

These files should be marked and uploaded separately as supplemental files during submission and should be referenced within the text as supplemental data i. Supplemental files must be labeled consecutively i. When labeling your files and referencing them within the main text, please keep in mind the preferred naming conventions for supplements. If all supplemental materials are contained in a single file, that file should be referred to as "Supplemental Data. Do not include the supplemental captions in your manuscript file.

Please be advised, supplemental data are permitted for Article, Mini-Review, Review, and Special Report submissions only. Manuscripts of all other types with supplemental data will be returned to authors.

If accepted and posted online, the supplemental data will be referenced in the text of the print article directing readers to the URL of the website. Adobe Acrobat Reader is required to view these files and is available at no cost. Click the following link to download: For help during regular business hours, contact JALM via e-mail at jalm aacc. Please see the Registration FAQ for more extensive help.

Before submitting a manuscript or review, you must register with our manuscript submission and tracking system. After accessing the registration page, you will need to verify your e-mail address. If there is an existing account with an old e-mail address, do not create a new account with a different e-mail address.

Always use the same e-mail when accessing the system. Multiple e-mail addresses will cause repeated registrations and the creation of multiple accounts, which could lead to future system access problems.

You must be registered individually with each journal you are trying to access. E-mail addresses, passwords, and other contact information can be modified at any time by clicking "Personal Info" from the gray navigation bar at the top of any page within the manuscript processing system. Feel free to contact the Editorial Office via e-mail at jalm aacc. Please see FAQs at http:

Learn More About